<u id="hav74"></u>
  • <b id="hav74"></b>

      1. Thermawall Series

        Thermawall Series-51mm平板可單件設計,最終完成集保溫性能,濕度控制和美觀于一體的完整外墻設計。

        Thermawall Series 51mm Flat panel provides outstanding aesthetics and value, along with maximum thermal performance and moisture control – all in a single component.

         

        面板采用50mm厚金屬巖棉復合板(外板0.7mm,鍍鋁鋅基板,雙面鍍鋅含量150g/㎡,屈服強度不低于345MPa。

        Outside panel : 50mm metal composite panel(outside panel 0.7mm, galvanized base plate, Zinc content 150g/,yield strength no less than 345MPa.

        板:采用鍍鋁鋅鋼板,厚度為0.5mm,PE涂層,屈服強度為不低于330MPa,采用鍍鋁鋅基板。

        Base panel : 0.5mm galvanized steel plate with PE coating,yield strength no less than 330MPa, galvanized base plate.

        中間層:填滿容重120kg/m3巖棉,導熱系數0.046w/(m.k),燃燒性能A2級不燃材料(金屬巖棉復合板的構造做法及相關技術要求需符合國家建筑標準設計圖集08J925-3的相關要求),采用螺釘連接。面板間縫隙采用泛水收邊條及硅膠填嵌。

        Core material: Core material: filled with 120kg/m3  Rockwool, coefficient of thermal conductivity 0.046w/(m.k), A2 level incombustible material( this metal composite panel meet nation building standard design requirements for component structure and relevant technique ). Gap between panels is filled with flashing edge and silica gel.





        可水平或豎直方向安裝。

        Can be installed horizotally or vertically.

        材質

         G90鍍鋅基材,鋁鎂錳合金,鈦鋅基材,銅基材,陽極氧化基材

        尺寸


        標準厚度50mm/75mm/100mm/150mm

          也可選擇其他型號配置,請向斯迪萊特公司咨詢

        飾面處理

        外表面-無方向性壓花表面,亦可平板或條紋板

        內表面-無方向性壓花表面,寬條效果

        接縫處理

        垂直方向-雙榫槽接口

        水平方向-等壓雨屏設計,13mm標定尺寸接縫-標準型

        板材寬度

        標準型-1米

        定制-寬度可選

        板材長度

        平板光面-最大8.0米

        壓花條紋面-最大11.0米

        壓花面-最大11.0米

          光滑條紋面-最大11.0米

        Duracast 飾面-最大8.0米

        橫縫深度

        4mm-150mm可調



        SUBSRATES

         G90 Galvanized base material,Aluminium,anodizing,zinc,copper


        SUBSRATES

        Standard thickness 50mm/75mm/100mm/150mm

        Optional gages available – consult STEELITE

        Optional stainless steel face sheet, 304 stainless steel, 22 or 20 gage, smooth, embossed or striated

        SURFACE FINISH

        Exterior - Non-directional embossed flat, striated or variable striated

        Interior- Non-directional embossed planked flat

        JOINERY

        Vertical oriented panel – Double tongue-and-groove, 1/8” [3mm] nom. joint – standard

        Horizontal oriented panel – Rainscreen, pressure-equalized and drainable joinery, 1/2” [13mm] nom. joint – standard

        PANEL WIDTH

        Standard-1meter

        Custom-made

        PANEL LENGTH

        Smooth – 8.0m max.

        Embossed striated – 11.0m max.

        Embossed – 11.0m max.

        Smooth striated-11.0m max.

        Duracast – 8.0m max.

        Variable reveals

        ● 4mm-150mm

         


        台湾佬美性中文娱网在线,城里少妇口很不错11p,欧美日本在线观看超清不卡,大香网伊人久久综合网AV,国产日韩免费久久播影院,亚洲 欧美 国产 综合aⅴ十-亚洲超碰国产欧美日韩